File a Claim

Please fill out as much information as possible. Also needed will be pictures or video of the property, showing the damage. Please use the upload button at the bottom of the form.

  • Business, Entity, or Individual Name
  • In the event we need to mail you a claim check, please enter your current mailing address.
  • Property address where the claim has occurred.
  • Enter a brief description of the incident/occurrence here.
  • Drop files here or
    • Your policy provides a provision granting you the authority and requirement to mitigate this loss & therefore will reimburse you for prudent actions in your mitigation efforts. Please follow the steps below. If you have any questions, please contact us at 1-800-579-0652 immediately.
      1. Mitigate the loss

        If Water Damage:
        1. Turn off the main water supply to the property
        2. Pump all excess water from the property
        3. Remove any wet carpet
        4. Cut & remove any wet drywall approx 12” above highest point of moisture
        5. Remove any wet insulation
        6. Save any damaged pipe for the adjuster
        7. Place multiple fans to circulate on wet areas for drying
        If Vandalism or Theft: secure the structure and cover any roof damage
        1. Board up all ground level windows and doors
        2. Use OSB cut to the size of the opening & utilize T-25 screws
      2. Complete claim form in its entirety
      3. Provide picture of the entire property including the following:
        1. Exterior – all sides
        2. Interior – all rooms even those that are not affected by claim including the basement
        3. Make sure to include the HVAC system, electrical panel & plumbing
      4. Submit all receipts for incurred expenses pertinent to loss
      5. Provide two estimates from contractors for repairs as soon as possible.

      Time is of the essence; therefore do not delay mitigating the loss. Send all pertinent information you have relating to the loss. We are here to help!

    • This field is for validation purposes and should be left unchanged.